Insulation glass processing equipment correct debugging instructions

[China Glass Net] The commissioning of insulating glass processing equipment is one thing to be done before production. When debugging, first ensure that the entire production line is placed in the required position, and the position and order of each part must be correct. If there is an error in the order, it will not be able to talk about the normal production process. After the preparation work is completed, it is necessary to adjust the fuselage of the production line. The principle of adjustment is to keep the machine flat.

This process requires the bolts on the base of the insulating glass processing equipment to be leveled, so that the parts such as the transfer rolls can be more highly achievable. The production line requires multiple parts, and these parts need to be well connected throughout the production process. The staff needs to check if some of these joints are solid. If it is loose, retighten it, or there will be problems when transferring between parts. After the connection is completed, the fan and the water tank should be placed.

One of the keys to the installation process of insulating glass processing equipment is the connection of ducts and water pipes. This connection process cannot be carried out blindly. In fact, the system diagram of the waterway and the windway will be used in the installation work of the production line. Installation through these system diagrams is guaranteed to be correct. Wait until the production line is working before turning on the power to check the line. While ensuring that the line is normal, look at the normality of each pipe of the insulating glass processing equipment.