Precautions for operating hollow glass processing equipment

[China Glass Network] We know that if you want to use a device correctly, you must not follow the corresponding operating procedures to avoid major operational accidents and avoid threats to the personal safety of operators. Therefore, the precautions in the operation process cannot be ignored. The same is true for the operation of insulating glass processing equipment. So, what are the precautions when operating this device?

First of all, before operating the insulating glass processing equipment, first check the equipment, whether the machine is placed in a horizontal position, whether the parts are loose or not, etc., first check carefully to make sure that there is no problem, then you can Start the boot operation. However, before starting the machine, make sure that there are no other people who are not involved in the glass processing operation to prevent accidents.

Secondly, when operating the insulating glass processing equipment, pay attention to the operation of the machine during the operation of the machine. If there is no abnormality, you can carry out various operations such as glass cutting. If it is necessary to make some adjustments to the machine saw blade. At this time, the adjusted saw blade cannot start cutting the glass immediately. The operation of the saw blade should be observed. If there is no problem after running for a period of time, the saw blade can be cut to protect the saw blade from damage.

If there is any abnormality in the equipment during the glass processing, then the machine should be stopped immediately. At this time, you need to press the “Emergency Stop Switch” to stop the operation. If the insulating glass processing equipment does not need to be operated temporarily or the operator needs it. Temporarily leave, in order to prevent others from doing undue operations on the machine, you should also protect the device by pressing the "motor stop" button or the "emergency stop switch".